Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Cap & Crown Across Fort Greene
Cap and crown work in Fort Greene is rarely about sweeping. Most of the chimneys on this neighborhood’s rowhouses and brownstones were built for coal or wood and have sat abandoned for generations. The roof still leaks, the crown still cracks, and rain still finds its way down. We handle chimney cap & crown work for Fort Greene homeowners who want the roofline sealed, the masonry stabilized, and a straight explanation of what’s actually happening up there. Call (855) 301-8570 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Fort Greene Homeowners Call Chimney Sweep Williamsburg for Chimney Cap & Crown
Fort Greene is a neighborhood of shared walls, and that shapes how we approach every cap and crown job here. A flue on one of the block’s brownstones usually sits directly against the neighbor’s, so we look at both sides of the stack before recommending anything. Our technicians have up to 12 years of experience, and part of that experience is learning when to say “this can wait” and when a crown crack is actively letting water into someone’s ceiling plaster.
We work with professional-grade materials from DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield, and every cap or crown recommendation comes with camera footage and a photo report you can review yourself. Nothing gets sold on a hunch. The local pro we connect you with is licensed and insured as their state requires, and the price you’re quoted is set in a written estimate before any work begins.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Cap & Crown Services in Fort Greene
We offer cap and crown work as distinct services rather than one bundled line item. A Fort Greene homeowner might need only a crown coating on a brownstone with hairline cracks, or a full multi-flue cap rebuild on a converted loft building with a shared stack. Here’s how each service works.
Cap Installation
An uncapped flue on a Fort Greene rowhouse draws damp air year-round and lets coastal storm rain drive in sideways. A properly sized stainless cap keeps water, birds, and squirrels out while letting exhaust escape. On stepped-parapet rooflines, the cap has to be fitted with correct flashing at the roof-wall junction so it never funnels water down the masonry.

Cap Replacement
Older caps rust, warp, or were sized wrong from the start. When an oversized cap sits on a Fort Greene chimney, it can collect water and send it down the roof-wall junction instead of shedding it. We replace caps to the correct flue dimensions and check the crown at the same time, since a failing cap often means the crown underneath has been taking the abuse.

Crown Repair
The original mortar crowns on 19th-century Fort Greene chimneys crack as they age, and each freeze-thaw winter widens those cracks. Once water gets inside, spalling brick and crumbling joints follow, and the damage shows up as stains on the ceiling plaster below. Crown repair rebuilds the sloped top so water sheds away from the flue instead of soaking into it. This is where the camera inspection earns its keep: we show you the crown on screen before recommending a rebuild or a coating.

Crown Coating
When a crown is cracked but structurally sound, a flexible coating can seal it without a full rebuild. We use ceramic and elastomeric coatings from HeatShield and similar professional lines so the surface flexes with the masonry instead of cracking again the first cold snap. Crown coating is appropriate only when the camera confirms the crown’s core is intact; if it isn’t, coating is a waste of money and we’ll say so.
Trusted Brands We Service in Fort Greene
We install and service products from DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield, and we match the brand to the job rather than the other way around. A brownstone with an abandoned clay-tile flue behind a stepped parapet needs different cap geometry than a prewar apartment building with a shared chimney stack. Because we handle the whole system, a crown repair found during a cap installation can be resolved without calling a second contractor. We don’t stock parts locally; we specify the right component for your flue and get it installed correctly.
See the difference
Before
After
Before
After
Before
AfterCommon Chimney Cap & Crown Problems We See in Fort Greene Homes
- Shared party-wall stacks. On the neighborhood’s brownstones, one flue often sits directly against the neighbor’s. A missing cap or cracked crown on one side of the roofline can push water into two households’ plaster at once, which is why we look at both sides before touching the mortar.
- Cracked mortar crowns on 19th-century brick. Freeze-thaw winters widen hairline cracks year after year. Once water gets in, spalling brick and interior ceiling stains follow, and the repair gets more expensive the longer it’s left.
- Uncapped abandoned flues. Most of these chimneys no longer vent wood or coal, but an open flue still pulls damp air and sideways rain into the home. Capping an abandoned flue is usually the single cheapest fix for a damp chimney interior.
- Poorly flashed caps on stepped parapets. An oversized or badly flashed cap funnels water down the roof-wall junction and rusts out within a few seasons. The cap has to match the flue dimensions and sit correctly against the parapet.
Pricing for Chimney Cap & Crown in Fort Greene, NY
These are typical estimated ranges for cap and crown work on Fort Greene’s older housing stock. The written estimate sets the final price, and it’s always agreed before booking.
- A typical cap installation in Fort Greene runs $250 – $600, depending on flue count and flashing complexity.
- A typical multi-flue cap on a shared brownstone stack runs $450 – $900.
- A typical custom cap runs $700 – $1,400, sized to non-standard masonry dimensions.
- A typical crown repair runs $500 – $1,200, depending on crack severity and whether re-pointing is needed.
- A typical crown coating runs $350 – $800.
Costs climb when the crown needs a full rebuild rather than a repair, or when flashing has to be re-done at the roof-wall junction. The estate is free and the camera inspection is included with the report. Chimney cap & crown work on party-wall stacks may need both owners in agreement before anyone touches the mortar, so build that into your timeline.
We Also Serve Cities Near Fort Greene
We work with homeowners throughout Fort Greene and the surrounding neighborhoods, including Clinton Hill next door, Prospect Heights to the east, Williamsburg to the north, and Brooklyn Heights to the west. Cap and crown problems tend to run in clusters across these older rowhouse blocks, so a conversation with us about one address often helps a neighbor too.
Serving Fort Greene, NY – Our Local Coverage Area
We serve Fort Greene and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Cap & Crown in Fort Greene
Yes. An abandoned flue on a Fort Greene brownstone still draws damp air and lets rain and animals in. The crown is the roof of that flue, and if it’s cracked, water gets into the masonry whether or not you burn anything. Call (855) 301-8570 for a free estimate – the camera inspection will show you the crown and flue condition before any work is proposed.
Because most Fort Greene brownstones share party-wall chimney stacks, so water entering the neighbor’s flue can travel into your masonry and reach your plaster. The flue on one side often sits directly against the other, and a crack in a shared crown lets water in on both sides. We inspect both sides of the stack and show you the footage on screen so you can see what’s connecting the two. Call (855) 301-8570 to schedule.
Ask to see the camera footage. If the contractor can’t show you the inside of the flue on screen, you don’t have evidence yet. On Fort Greene’s abandoned clay-tile flues, some reline recommendations are legitimate and some aren’t, and the difference is always what the camera shows. We put that footage in the photo report before recommending anything. Call (855) 301-8570 for an inspection with evidence you can review.
Crown repair rebuilds the mortar top of the chimney; crown coating seals the surface of an intact crown. A crown with deep cracks or missing mortar needs a repair or rebuild, while a crown that’s solid but showing hairline cracks can take a flexible coating. The camera decides which one applies on your Fort Greene chimney. Call (855) 301-8570 for a free estimate.
Usually yes, if the cap is fitted to the actual flue count and dimensions rather than picked off a shelf. On a shared stack, the cap has to clear each flue opening without blocking flow, and the flashing needs to work on the stepped-parapet roofline. A custom cap handles irregular masonry dimensions; a properly sized multi-flue cap handles the standard ones. Call (855) 301-8570 and we’ll tell you which your building needs.
Cap and crown problems on Fort Greene’s rowhouses only get more expensive with time, and the camera inspection puts you in a position to decide based on evidence rather than a sales pitch. Call (855) 301-8570 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Williamsburg.