Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Gelco Chimney Cleaning in Fort Greene, NY
We provide independent Gelco service across Fort Greene, and the one thing that makes our Gelco work here different is this: most of it isn’t cleaning at all. On Fort Greene’s brownstones and rowhouses, the flues stopped burning wood and coal long ago, so the real work on a Gelco cap, damper, or door set is sealing, sizing, and stopping water before it reaches interior plaster. We handle that work on the full chimney system, from the cap down through the crown and flue.

As an independent Gelco service provider, we’re not affiliated with, authorized by, or endorsed by the manufacturer. We simply know the brand well and diagnose it honestly. Our technicians have up to 12 years of experience, and we install and service Gelco alongside DuraFlex, HeatShield, Olympia Chimney, Famco, and Copperfield. Where a repair makes sense we repair; where a part has gone structural we say so.
Call (855) 301-8570. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Fort Greene Residents Choose Us for Gelco Service
Gelco parts show up on Fort Greene chimneys in a few recognizable forms: the stainless single-flue cap, the multi-flue cap on shared stacks, the top-sealing damper, and glass door or spark screen sets on wood fireplaces. We’ve worked on all of them across the neighborhood’s older housing, and we know how each one behaves after a decade of New York winters rather than how it looks in a catalog.
What that means for you is straightforward. We quote the work from what we actually find at the cap and the crown, using quality parts that fit your existing unit or a correctly sized replacement when a stock part won’t sit right. We tell you what we find and why it matters for your safety and the integrity of your home. And we schedule around your building, which on a party-wall stack often means coordinating a time that works for more than one household.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Common Gelco Chimney Cleaning Problems We Solve in Fort Greene
These are the Gelco failures we see most often on Fort Greene’s 19th-century stacks, each tied to how this neighborhood’s housing and weather treat the equipment.
- A single-flue cap sized for one flue on a shared stack. Fort Greene brownstones often have two flues sitting side by side on a party wall, and a Gelco cap sized for just one leaves the neighbor’s adjacent flue open to the sky. Wind-driven rain from coastal storm remnants then weeps down both chimneys, and the stain shows up inside two homes, not one.
- A top-sealing damper with a seized gasket. In flues that haven’t burned wood or coal in decades, the gasket on a Gelco top-sealing damper can seize after years of disuse. The plate then sticks part-open, and through the humid summer it draws damp air straight down the flue into interior plaster.
- A cap screen torn at the mesh-to-frame seam. Gelco cap screens corrode over time, and the seam where the mesh meets the frame is where they fail first. That tear opens a gap exactly the size critters use to get into an uncapped or half-capped brownstone flue.
- Glass door frames and gaskets pitted by freeze-thaw. Gelco fireplace door frames and gaskets on wood fireplaces pit and warp through New York City’s freeze-thaw cycles. When the door seal goes, smoke leaks at the door instead of drafting up the flue.
- A cracked crown letting water into an abandoned flue. When the crown cracks and widens at a mortar joint, rainwater reaches a flue that no longer burns and has no heat to dry it out. The damp then degrades the plaster below and shows up as a stain weeks after the storm.
Gelco Service in Fort Greene: What Local Conditions Mean for Your Equipment
The local insight that shapes every Gelco job here is the party wall. Fort Greene’s brownstone chimneys sit on shared stacks behind stepped parapets, so a Gelco cap or crown job on one rowhouse routinely has to be sized and flashed against the neighbor’s flue sharing that same stack. A one-sided fix can push water into the adjacent home instead of keeping it out. Add New York City’s freeze-thaw winters and humid summers and the older brick takes a beating: mortar joints spall, crown cracks widen, and an abandoned flue draws damp air that degrades interior plaster. That’s why a qualified local pro checks both sides of the stack before ordering a cap, clears the deteriorated crown, repoints spalled mortar, and fits a correctly sized or multi-flue cap with careful flashing at the roof-wall junction. If this describes your block, start with Fort Greene and we’ll take it from there.
Gelco Models & Products We Service in Fort Greene
We service the Gelco products that actually sit on Fort Greene chimneys: stainless-steel single-flue caps, multi-flue caps for shared party-wall stacks, top-sealing dampers, and fireplace glass door and spark screen sets. Each one gets the same treatment. We look at the frame, the screen, the gasket, and the seating before recommending anything.
Genuine Gelco caps, dampers, and door hardware are worth sourcing when the existing unit is sound. On Fort Greene’s older stacks, though, a correctly sized multi-flue or custom cap often beats forcing a stock Gelco part onto an irregular crown. We repair when the frame and screen are serviceable and recommend replacement when corrosion or gasket failure has gone structural. No blanket replace. For the full picture of how we approach the brand, see our Gelco service page.
See the difference
Before
After
Before
After
Before
AfterGelco Service Pricing in Fort Greene
Every price here is an estimate set per job, and the written estimate you receive is what sets the final price. What drives the cost is mostly access and scope: a single-flue cap on a straightforward crown runs less than a multi-flue cap on a shared stack, and a crown repair that needs repointing and flashing at the roof-wall junction runs more than a cap swap alone. A free estimate includes us looking at the cap, crown, and flashing, checking both sides of a party-wall stack where that applies, and telling you plainly whether the work can safely wait.
These are typical ranges for the kind of Gelco and masonry work we do in Fort Greene:
- Cap installation (single-flue): estimated per job after we see the crown
- Multi-flue cap for a shared stack: priced by stack size and flashing
- Crown repair and repointing: quoted by the extent of the mortar work
- Top-sealing damper service: quoted on gasket and plate condition
Call (855) 301-8570 for an exact quote. Estimates are free.
Serving Fort Greene, NY – Our Local Coverage Area
We serve Fort Greene and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Gelco Chimney Cleaning in Fort Greene
Yes, but it has to be sized and flashed so it doesn’t leave the neighbor’s flue exposed or push water sideways into their home. On a shared party-wall stack we check both flues, then fit a cap that covers your side properly or a multi-flue cap where the stack calls for one.
Often you do, but for a different reason than heat loss: an abandoned flue draws damp summer air that degrades interior plaster, and a top-sealing damper that actually seats shuts that path off. If the gasket has seized from disuse, we can service it or tell you when a replacement is the honest answer.
Most tears start at the mesh-to-frame seam, where corrosion sets in first on an older cap. It’s less about the ZIP and more about the cap’s age and how much weather it has taken. We inspect the seam and either repair the screen or recommend a replacement cap sized for the flue.
It often is, because a cap or crown change on an old chimney is a chance to see the full flue and confirm what the repair is really addressing. We offer chimney inspection as a standalone service, not only bundled into a sweep, and it’s suitable for real-estate transactions and insurance requests too.
In many cases yes. Repointing spalled mortar and sealing a cracked crown with proper flashing usually resolves the leak without a rebuild, and we’ll tell you plainly when that’s the case and when it isn’t. Call (855) 301-8570 for a free estimate.
Service Areas Near Fort Greene
We also serve homeowners in Williamsburg, Bedford-Stuyvesant, Clinton Hill, Prospect Heights, and Crown Heights. The housing stock shifts block by block, but the party-wall and freeze-thaw issues travel right along with it, so the approach stays the same.
Book Your Gelco Service in Fort Greene Today
If a cap, damper, or crown on your Fort Greene chimney needs attention, we’ll come look, show you what we find, and give you a written estimate before any work begins. Call (855) 301-8570. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Estimates are free.
Written by the team at Chimney Sweep Williamsburg.