Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Cap & Crown Across Bushwick
Bushwick chimney work is a different trade than suburban chimney work. Most of the housing stock here is 1880s-1920s brick tenements and rowhouses, and the shared multiflue stacks on those roofs need a cap and crown sized to the whole stack, not one flue. We know that difference, and we know the neighborhood: the walk-ups off Knickerbocker Avenue, the converted lofts near the Jefferson Street L stop, and the corbelled brick stacks along Bushwick Avenue that have taken a century of nor’easter rain. Cap and crown work is what keeps those stacks from soaking through into your neighbors’ apartments. Call (855) 301-8570 for a free estimate.
Why Bushwick Homeowners Call Chimney Sweep Williamsburg for Chimney Cap & Crown
Homeowners and building owners in Bushwick call us because we treat a chimney as a system and not a single pipe. When we look at a crown or a cap, we’re looking at the whole roof assembly: the mortar joints under the crown, the clay tiles inside each flue, and the masonry that holds them together. That matters in a building where four apartments share one stack.
Our technicians have up to 12 years of experience, and the materials we install come from professional-tier brands – HeatShield, DuraFlex, Gelco, Olympia Chimney, Famco, and Copperfield – the same products specified across the chimney industry rather than hardware-store substitutes. Because a chimney is a system, we inspect and service every component, not just the flue.
We reach Bushwick from our Williamsburg base area quickly, and when a stack needs more than a cap – a liner, a fireplace repair, a full inspection – we handle it as one job with one company. We tell you what we find and why it matters for your safety and your building’s integrity. No subcontractors, no second call.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Cap & Crown Services in Bushwick
Cap Installation in Bushwick
A proper cap does two jobs on a Bushwick stack: it keeps the weather out and it keeps the birds out. Pigeons and squirrels are a recurring spring-to-fall problem here, and an open flue is an open invitation. We size the mesh to each opening so nothing nests and draft still flows freely.

Cap Replacement in Bushwick
Older caps on Bushwick rowhouses were often fitted to one flue and left the rest of the stack exposed. We pull the old cap, look at what’s happened to the masonry and tile underneath, and replace it with a cap built for the whole stack. If the tile has spalled, we’ll tell you before we cover it up.

Crown Repair in Bushwick
The crown is the concrete cap on top of the brick, and on these 1880s-1920s stacks it’s the first thing to go. Repeated freeze-thaw cycles crack and spall the original flat or under-sloped crowns, and water wicks straight into the shared flues. Crown repair breaks out the failed material and recasts it with proper slope and overhang so water runs off instead of in.

Crown Coating in Bushwick
When a crown is sound but starting to weather, a coating buys it years. We prep the surface and apply a coating suited to the Northeast freeze-thaw cycle. It’s a smaller job than a full recast, and we’ll tell you honestly when it’s the right one.
Trusted Brands We Service in Bushwick
We install and service chimney products from professional-tier makers: HeatShield for ceramic flue resurfacing, DuraFlex for flexible stainless relining, and Gelco, Olympia Chimney, Famco, and Copperfield for caps, crowns, and related components. These are the names certified chimney engineers specify, and they’re what we work with when a Bushwick multiflue stack needs a custom cap or a liner upgrade. We don’t claim to stock parts locally – we assess the stack first, then specify the right materials for it. That approach gives you a correct fit and a fast turnaround.
Common Chimney Cap & Crown Problems We See in Bushwick Homes
- Flat or under-sloped crowns on corbelled brick. These crack and spall after repeated freeze-thaw, and on a shared stack the water wicks into more than one flue and more than one apartment. By the time a tenant sees a damp patch, the crown has usually been failing for a while.
- Uncapped multiflue stacks. A single-flue cap on a four-flue stack leaves three openings for pigeons, squirrels, and driving nor’easter rain. That’s how one blocked flue backdrafts smoke and carbon monoxide into a neighbor’s unit.
- Cap and crown fitted to only the complained-about flue. When the work stops at one opening, the rest of the stack keeps degrading and the clay tile keeps cracking around the new material. The whole stack needs attention, not just the loudest problem.
- Mortar-joint decay hidden under old coating. Stacks built for coal and later converted to oil and gas were never designed for modern venting. Failed joints under a patched crown don’t show until the crown comes off, which is why we open it up before we quote.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Cap & Crown in Bushwick, NY
Here are typical ranges for the Bushwick market. A standard single-flue cap installation usually runs $250-$550. A multi-flue cap sized for a three- or four-flue tenement stack typically runs $600-$1,400 depending on the number of openings and whether a custom stainless unit is needed. Crown repair on a failed multiflue crown generally falls between $500 and $1,500. Crown coating on a sound crown is usually $300-$700. What moves the number: how much masonry has to come out, access to the roof, and whether tile repair or a liner becomes necessary once we’re inside. The written estimate sets the final price, and it’s free. Call (855) 301-8570.
We Also Serve Cities Near Bushwick
Cap and crown work on old multiflue stacks doesn’t stop at the Bushwick line. We also serve neighbors across Bushwick and into Bedford-Stuyvesant, Williamsburg, Fort Greene, and Brownsville, where the same 1880s-1920s brick stock and shared chimneys create the same problems. If you’re unsure whether your building is in range, call and ask. Our chimney cap & crown team covers the whole area around Bushwick.
Serving Bushwick, NY – Our Local Coverage Area
We serve Bushwick and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Cap & Crown in Bushwick
Yes, in almost every case. A custom multi-flue cap is the right answer for a shared stack because it covers every opening with mesh sized to each flue, so no tenant’s flue is left open to rain, birds, or cross-contamination. On these Bushwick stacks the openings vary in size and spacing, so an off-the-shelf single-flue cap won’t seal the top correctly. Call (855) 301-8570 for a free estimate and we’ll spec the cap to your stack.
Freeze-thaw cycles are the main cause. The original flat or under-sloped crowns on 1880s-1920s brick were never built to shed water well, and each winter the moisture inside them expands and spalls the concrete. Once that starts, water gets into the shared flues and the damage spreads to adjacent apartments. A recast crown with proper slope and overhang stops it. Call (855) 301-8570 to book an inspection.
Yes. On a multiflue stack, each flue is supposed to be sealed from the others top and bottom, but a cracked clay tile or a failed crown breaks that separation. A blocked flue in one apartment can then backdraft smoke and carbon monoxide into a neighbor’s unit. That’s why a cleaning call on a Bushwick multiflue stack usually means pulling a camera and smoke-testing every flue, not just the one the caller complained about.
A Level 2 inspection is the right call whenever the chimney system is changing – a new liner, a new appliance, or a real-estate transaction – and it’s strongly recommended before major cap or crown work on an old multiflue stack. It lets us see the condition of every flue before we cover them. We offer inspection as a standalone service. Call (855) 301-8570 to schedule one.
It’s worth fixing before the next hard rain. A missing cap on a Bushwick stack lets nor’easter rain drive straight into the flue and lets pigeons and squirrels nest, and both cause damage that shows up months later. The crown may look intact from below but water getting in around the flue opening can still crack the tile. Call (855) 301-8570 for a free estimate and we’ll tell you what we find.
Contact Chimney Sweep Williamsburg for Chimney Cap & Crown in Bushwick
A cap or crown job on a Bushwick multiflue stack is worth doing right the first time. Call (855) 301-8570. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. We’ll assess the whole stack, explain what we find, and give you a free written estimate before any work starts.
Written by the team at Chimney Sweep Williamsburg.