Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Cap & Crown Across Crown Heights
Crown Heights runs on old chimneys. The three- and four-story brick rowhouses and brownstones built between roughly 1900 and 1935 still carry their original flue tiles, and a good share of them are missing a cap or wearing a crown that stopped shedding water decades ago. We know the housing here, we know what these shared party-wall stacks do when water gets in, and we can talk you through it before anything is recommended. Call (855) 301-8570. We answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday.
Why Crown Heights Homeowners Call Chimney Sweep Williamsburg for Chimney Cap & Crown
Crown Heights is a neighborhood we know block by block, and we’ve built a strong local reputation by telling people plainly what we find and what can wait. Nothing gets recommended without camera evidence you can see for yourself on the monitor, which matters most in a neighborhood where the “you need a whole new liner” pitch is common and hard to verify.
Our technicians have up to 12 years of experience, and we handle the whole chimney system: Chimney Sweep, Chimney Cap & Crown, Chimney Repair, Fireplace Repair, and Chimney Inspection. We install and work with professional-grade materials from DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield, the same brands specified across the trade, not hardware-store substitutes.
When you call about a cap or crown in Crown Heights, we book the visit and give you a flat price for the job from the written estimate, agreed before anything starts. That’s how we run every Crown Heights job, plain and in writing.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Cap & Crown Services in Crown Heights
A cap or a crown isn’t a cosmetic addition. It’s what keeps rain, snowmelt and animals out of a flue that in this neighborhood was often built for coal and now vents a gas boiler. Here’s what our chimney cap & crown team handles in Crown Heights.
Cap Installation
On the shared stacks common across Crown Heights rowhouses, a cap has to be sized to the actual number of flue tiles the stack carries, not to one opening. We measure, fit and secure a cap that closes off the unused tiles and keeps nor’easter rain from soaking the soft clay bricks below. Installed right, a cap is the cheapest protection a Crown Heights chimney can get.

Cap Replacement
A rusted or battered cap is one of the first things we look at when we’re on a Crown Heights roof. The old one comes off, we check the flue opening and tile condition underneath, and we fit a replacement built for the stack in front of us. On a three- or four-story brownstone, that’s a job for someone comfortable on height with the right gear.

Crown Repair
The crown is the mortar top that sheds water away from the flue, and on Crown Heights’s old chimneys it’s often cracked or holding water. We repair crowns with materials that move with the brick instead of fighting it, and we get the slope right so water runs off rather than pooling against the flue tile. A crown that’s flat or pooled with water is a repair, not a coating.

Crown Coating
Where the crown is sound but worn, a flexible coating reseals the mortar joints and buys the structure real years. We favor flexible coatings like Gelco and HeatShield designed for old brick, because rigid mortar patchwork cracks again with thermal movement. Coating is the lighter-touch option, and we’ll tell you when it’s the right call versus a full repair.
Trusted Brands We Service in Crown Heights
We install and service products from DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield. These are the brands chimney engineers specify for caps, crowns, and liner protection, and using them means the repair is built to last past the next freeze-thaw cycle. We don’t claim to keep a stock of parts on hand; we size and specify for your Crown Heights chimney and get the right material to the job. Turnaround stays quick, and you get a product meant for this work rather than whatever a hardware aisle had in stock.
See the difference
Before
After
Before
After
Before
AfterCommon Chimney Cap & Crown Problems We See in Crown Heights Homes
These come up again and again on the rowhouse blocks here, and each one is worth checking before the next storm.
- Missing or rusted caps on shared stacks. Water gets straight into the flue tiles and hastens spalling of the soft clay bricks and mortar crowns. On a shared party-wall stack, that damage doesn’t stay in one unit.
- Cracked clay tiles from freeze-thaw. Humid summers followed by freeze-thaw winters crack the original flue tiles, and without a camera look inside, a single cracked tile can pass carbon monoxide into an adjacent unit through the shared stack.
- Rigid mortar crown repairs that just crack again. Old brick moves with the seasons, and a crown patched with stiff mortar splits along the same lines. Flexible coatings made for old brick hold where mortar patchwork fails.
- Single-flue caps on multi-flue stacks. A cap sized for one opening leaves gaps on a stack that carries several flue tiles, so rain and animals find the open ones. A custom multi-flue cap closes the whole stack.
Pricing for Chimney Cap & Crown in Crown Heights, NY
Cap and crown work in Crown Heights is priced per job from a written estimate, and the numbers below are typical for this market. A standard single-flue cap installation in Crown Heights runs about $250 – $550. A custom or multi-flue cap for a shared party-wall stack runs about $450 – $900, since it’s sized and built to the stack. Crown coating runs about $300 – $600, and a crown repair with flexible material runs about $400 – $900 depending on how much of the top has to come down and be rebuilt.
What moves the price is the number of flue tiles on the stack, how much of the crown is deteriorated, and access on a three- or four-story building. We don’t add a trip or diagnostic charge. The free estimate sets the final price, and the written estimate is what you pay. Call (855) 301-8570 for an exact quote, and see the camera evidence before you decide.
We Also Serve Cities Near Crown Heights
The same cap, crown and relining work reaches the neighborhoods around Crown Heights. If you’re in East Flatbush, Williamsburg, Prospect Heights, or Bedford-Stuyvesant, we can book you for the same camera-led approach to aging shared stacks and old clay tiles. You can read more about our work across Crown Heights and the surrounding areas, and reach the broader Chimney Cap & Crown overview for the full range of caps, crowns and coatings we handle.
Serving Crown Heights, NY – Our Local Coverage Area
We serve Crown Heights and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Cap & Crown in Crown Heights
Yes, you can cap your flue alone, but on a shared party-wall stack it’s rarely the full fix. Your flue needs its own sealed cap to stop water and animals entering, and if the stack carries several tiles, a custom multi-flue cap fitted to your openings keeps your neighbor’s side out of your draft. We’ll show you on camera which tiles serve which unit before recommending anything. Call (855) 301-8570, and the estimate is free.
A crown that’s cracked through or holding water needs repair; a crown that’s sound but worn at the mortar joints can often take a flexible coating instead. The difference is what the material does when the brick moves with the seasons, and we check it directly on the roof rather than guessing from the ground. Coating buys years when the crown is intact, and repair is the honest call when it isn’t. Call (855) 301-8570 for a look and a free estimate.
A missing cap is a very common cause of a drafty, sour smell in a Crown Heights flue venting a gas boiler. Without a cap, cold air and rain pour down the open tile, and the stack loses the steady pull it needs, so exhaust and smells back into the room. A properly sized cap restores the draft and keeps the weather out. Call (855) 301-8570 and we’ll confirm it with a camera look, not a guess.
First-degree creosote is the light, flaky soot a sweep can brush away; third-degree is a hardened, glazed layer that has baked onto the tile and won’t brush off. On the old flues across Crown Heights, glazed creosote is a fire risk and usually means the flue needs more than a sweep, often a reline. We grade it on camera so you see what we see. Call (855) 301-8570 for a free estimate on what it takes to clear it.
A cap and crown help, but they don’t by themselves make an unlined flue safe for a gas boiler. A cap keeps water and animals out and a sound crown sheds water off the stack, yet an unlined flue still lets exhaust and moisture into the brickwork and can leak carbon monoxide through a shared stack. The fix is usually a proper liner paired with cap and crown work, which we do together. Call (855) 301-8570 for a camera inspection and a written estimate before anything is scheduled.
Written by the team at Chimney Sweep Williamsburg.