Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Cap & Crown Across Park Slope
If you own a brownstone in Park Slope, your chimney was probably built before anyone thought to line it. That matters for cap and crown work, because the cap and crown are the only things standing between a shared masonry stack and the rain. We connect Park Slope homeowners with independent local chimney professionals who handle cap installation, cap replacement, crown repair, and custom and multi-flue caps built for the stacks these blocks actually have. Call (855) 301-8570 for a free estimate.
Why Park Slope Homeowners Call Chimney Sweep Williamsburg for Chimney Cap & Crown
Park Slope is a neighborhood of shared chimneys, and shared chimneys have shared problems. The local pros we connect you with understand that a single crown crack over a party wall can show up as a damp stain on your neighbor’s side before it ever shows on yours. Our technicians have up to 12 years of experience, and every job starts the same way: a look at the whole system, not just the part you can see from the stoop.
We’re a cap and crown specialist, not a handyman adding a task. That means when a cap swap turns into a crown rebuild – which happens often on these brownstones – the same pro documents the condition, shows you the camera footage, and writes an estimate you can actually read. Nothing gets recommended without evidence you can see for yourself.
We serve Park Slope and the blocks around it, from the slope itself down toward the park edge, and we’re often working within a short drive of Prospect Heights, Carroll Gardens, and Clinton Hill on the same day. Scheduling around your building is part of the job here.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Cap & Crown Services in Park Slope
The cap and crown are simple components with one job: keep water out of a flue that was never designed to handle it. On a Park Slope brownstone, that job gets harder every winter. Here’s what the chimney cap & crown work normally involves.
Cap Installation in Park Slope
A chimney cap is the lid: a stainless or copper cover that lets smoke out and keeps rain, birds, and squirrels away from an open flue. In Park Slope, the correct cap is sized for the stack, not for the flue hole, because most of these chimneys carry more than one flue and a single-flue cap leaves the rest of the top exposed. We install stainless and copper caps spec’d for the masonry, including Famco and Olympia Chimney components built for the long haul.

Cap Replacement in Park Slope
Older caps on these brownstone chimneys rust through or work loose in a nor’easter, and once a cap has lifted, the flue is open to everything the sky sends down. Replacing a cap is usually a quick job, but the reason to act on it is the water that gets in while it’s missing. We check the crown while we’re up there, because a cap that failed is often sitting on a crown that’s failing too.

Crown Repair in Park Slope
The crown is the concrete or mortar cap at the top of the chimney itself, sloped to shed water away from the flue. On Park Slope’s shared stacks, crowns crack at the bond break over the party wall – a joint that moves as the building and its neighbor settle at different rates. Repair or rebuild restores that slope and overhang with a mix that bonds to the existing masonry, and we document the crack with photos so you can see why it was recommended.

Crown Coating in Park Slope
Where the crown is cracked but not failing structurally, a coating can seal the surface and buy time before rebuild. In Park Slope’s freeze-thaw winters, exposed brick and mortar at the chase top spall and flake faster than in drier climates, so a coating applied to a sound crown is a practical middle path. We tell you plainly when coating is enough and when the crown needs to come off and be rebuilt instead.
Trusted Brands We Service in Park Slope
Cap and crown components hold up or fail on the quality of the material, and we install professional-grade products from HeatShield, Gelco, Olympia Chimney, and Famco rather than hardware-store substitutes. Gelco and Olympia Chimney both make caps used across the chimney trade, and HeatShield products are specified where a crown or liner surface needs a ceramic coating that actually bonds. We don’t claim an on-hand stock of parts; we specify the right component for your stack and install it correctly. Because we handle the full service range – sweep, cap and crown, repair, fireplace repair, and inspection – a problem found during the cap job gets resolved, not handed to a second contractor.
See the difference
Before
After
Before
After
Before
AfterCommon Chimney Cap & Crown Problems We See in Park Slope Homes
These brownstones fail in predictable ways. That’s good news, because predictable failure is fixable.
- Crowns cracking over the party wall. On a shared stack, the crown cracks at the bond break where the chimney crosses to the neighbor’s side. The water that gets in through that crack often shows as condensation staining on their wall before you notice it on yours.
- Clay-tile flues spalling at the crown line. An original clay-tile flue was sized for an open fireplace, not the volume and moisture of a modern high-efficiency boiler. Over time the tile flakes and spalls right where the crown meets the flue.
- Multi-flue caps rusted or blown loose. Nor’easters work these caps loose and the salt of time rusts them through. Once the cap lifts, the flues are open to rain, birds, and squirrels, and what starts as a cap swap can turn into a crown rebuild.
- Unlined flues venting modern appliances. Where a 19th-century rear chimney now vents a high-efficiency boiler, condensation builds in a flue that was never designed for it. The staining and flaking you see at the top are the first sign the whole top of the chimney has lost its weather seal.
Pricing for Chimney Cap & Crown in Park Slope, NY
Here’s what the work typically runs in Park Slope, based on the cost of materials and labor in the city. These are estimated ranges; the written estimate sets the final price.
| Service | Typical Park Slope Range |
|---|---|
| Single-flue stainless cap, installed | $180 – $350 |
| Custom or multi-flue cap, installed | $400 – $900 |
| Crown repair (patch and slope) | $300 – $650 |
| Crown rebuild with proper overhang | $800 – $1,800 |
| Crown coating (sound crown, sealing only) | $250 – $500 |
What moves the number: how many flues the cap covers, whether the crown needs patching or full rebuild, how high the chase top sits above the roofline, and whether a shared party wall means two owners need to coordinate access. None of that is charged until it’s in the estimate. Estimates are free.
We Also Serve Cities Near Park Slope
The same brownstone chimney problems run right off the edge of Park Slope into the blocks around it. We connect homeowners with cap and crown work in Prospect Heights, Carroll Gardens, Red Hook, and Clinton Hill, and the local pros here know how these shared masonry stacks are built across the neighborhood. If you’re on the border between Park Slope and one of these areas, the estimate covers it the same way.
Serving Park Slope, NY – Our Local Coverage Area
We serve Park Slope and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Cap & Crown in Park Slope
Yes. On a shared stack, the cap can be sized and installed to cover only the flues that serve your building, leaving your neighbor’s openings alone. The tricky part is the crown: because it’s one continuous surface over both sides, crown repair has to be planned around the party wall so it doesn’t undermine your neighbor’s side. We document the shared structure with photos before recommending anything. Call (855) 301-8570 for a free estimate.
Repair suits a crown with isolated cracks that still sheds water; replacement is the answer when the crown has lost its slope, has separated from the flue tile, or cracked through at the bond break. The camera and photos settle it – we show you the crack and explain what we see, so the call is yours to make with the evidence in front of you. Nothing is recommended without that footage. Call (855) 301-8570 for a free estimate.
Not always. A cap keeps rain and animals out, but it does nothing about condensation from a modern boiler venting into a flue that was never lined for it. In Park Slope that condensation often shows up first as damp staining on the party wall next to the rear chimney. A Level 2 inspection with a camera shows whether the flue is spalling and whether a liner is the right fix before you spend on anything. We document the liner condition so you have it for any future gas conversion. Call (855) 301-8570 for a free estimate.
A proper crown is a concrete or mortar slab with a slight slope and a real overhang past the edge of the masonry, so water drips clear rather than running back into the brick and flue. On these brownstones that means a crown that respects the party wall and bonds to the existing stack rather than covering it with a thin skim. Any coating we apply sits on a crown that’s already sound, not over a failing one. Call (855) 301-8570 for a free estimate.
Yes – a cap is worth putting on an unused fireplace flue, because an open flue is an open door for rain, birds, and squirrels even when nothing is burning. Sealing the top also stops warm air from escaping up an unused flue. We size the cap to the stack, so an unused flue gets capped without blocking a flue the building still uses. Call (855) 301-8570 for a free estimate.
Whether it’s a crown crack over the party wall, a rusty multi-flue cap, or a boiler venting into a flue nobody ever lined, the first step is the same: an inspection with evidence you can see. Call (855) 301-8570 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Williamsburg.