Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Gelco Chimney Cleaning in Bushwick, NY
We provide independent Gelco service across Bushwick, and we’re not affiliated with or authorized by the manufacturer. What makes our Gelco work here different is the building stock: Bushwick’s shared brick stacks mean a Gelco multi-flue cap or top-mount damper that fails on one bay can affect a neighbor’s flue, not just yours. We scope the repair to the whole stack, test every flue with a camera and smoke, and tell you plainly what can wait. Call (855) 301-8570 for a free estimate on Gelco cleaning and cap work in Bushwick. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.

Why Bushwick Residents Choose Us for Gelco Service
Gelco products are a common sight on Bushwick rooflines, and our technicians have up to 12 years of experience with the particular way they age in this climate. We know how Gelco caps, dampers and covers behave after years of nor’easter rain and hard freeze-thaw cycling. That means we know where to look when one apartment’s draft goes wrong and the problem sits two floors above.
We’re an independent service provider. We repair, install and service Gelco equipment with quality parts that fit the job and the chimney it sits on. No sales pitch for a full system when a component swap is the honest fix. Scheduling is straightforward: you call, we book a sweep or a Level 2 inspection, and you get a written estimate before anything is agreed. Bushwick buildings demand that kind of care, and we bring it to every roof.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Common Gelco Chimney Cleaning Problems We Solve in Bushwick
These are the Gelco failures we run into most often on Bushwick’s pre-war brick stacks:
- Corroded mounting flanges and rivets on Gelco Multi-Flue Caps. Bushwick’s coastal nor’easters drive rain sideways into the cap, and the flange and rivet line is where it goes first. Once the steel corrodes, water runs down the clay tiles and spalls the corbelled brick around them.
- Seized Gelco Top-Mount Dampers. Freeze-thaw cycling and soot buildup lock these dampers open or closed. On a shared stack that means draft reversal or carbon monoxide spillover between apartments, which is a safety problem, not a comfort one.
- Cracked crown seams on Gelco Single-Flue Caps. When the original mortar bed shifts under an 1880s-1920s clay-tile liner, the cap crown seam cracks and opens a gap. Pigeons and squirrels find it every spring and nest inside the flue.
- Rusted-through base plates on Gelco Chimney Covers. Converted lofts and walk-ups with sealed chimney chases often hide separated seams and rusted plates under a cover. Water gets in, and mortar-joint decay on the chase speeds up quietly.
- Debris and soot packed behind a failing cap. When a Gelco cap no longer sheds water, creosote and nesting material collect at the flue top. A sweep alone won’t fix that; the cap has to be corrected first.
That list isn’t meant to worry you. It’s the map of what we check on a typical Gelco cleaning visit in Bushwick. If none of it applies, we say so.
Gelco Service in Bushwick: What Local Conditions Mean for Your Equipment
Here’s the local reality that changes how Gelco work plays out here. Bushwick’s 1880s-1920s brick tenement stacks typically carry three or four separate clay-tile flues for different apartments, all running up one corbelled chimney. When a Gelco multi-flue cap fails on one bay, water or nesting debris can enter a neighbor’s flue, not just the complaining tenant’s. Which means a cap replacement has to be scoped to the entire stack. A one-bay patch invites the same problem back, usually within a season.
The building stock compounds it. Heavy oil-heat history, later conversions to gas, and clay liners that have cracked and spalled after a century of freeze-thaw all meet at the same stack. A roof along the Bushwick rowhouse blocks shows the same pattern again and again. What was built for one appliance now vents another, and the flues were never sized for it. This is why a Gelco job here starts with a camera and smoke test on every flue in the stack, not a quick sweep of the one that gets called in.
Gelco Models & Products We Service in Bushwick
We service the Gelco products that sit on Bushwick roofs: multi-flue caps, single-flue caps, top-mount dampers and chimney covers. On pre-war tenement stacks, aftermarket caps and dampers often miss the exact flange spacing and seam geometry of an older Gelco unit, which is why we match quality parts that fit the existing installation. When the surrounding masonry and liner are sound, replacing the failed Gelco component is the correct fix. When the stack itself is compromised, a cap swap alone just hides it. We tell you which situation you’re in before any work is booked.
See the difference
Before
After
Before
After
Before
AfterGelco Service Pricing in Bushwick
Every job is priced per job by a written estimate, and the estimate is free. Typical cost depends on the number of flues in the stack, how much masonry repair the cap and crown need, and whether a Level 2 inspection is required. A straightforward Gelco cap replacement on a single-flue chimney costs less than a full multi-flue cap and damper swap paired with repointing. We can’t give an honest figure without seeing the roof and running the camera, so we don’t guess over the phone.

What the free estimate includes: a visual roof-level check of the Gelco cap, damper or cover, a camera inspection of each flue in the stack, and a written scope of what’s needed now versus what can safely wait. Nothing is recommended without camera evidence you can see for yourself. Call (855) 301-8570 to book your estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Serving Bushwick, NY – Our Local Coverage Area
We serve Bushwick and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Gelco Chimney Cleaning in Bushwick
Not safely, and not honestly. A partial cap replacement on a shared Bushwick stack leaves the corroded flange and rivet line on the neighbor’s bays untouched, so water and nesting debris keep entering. We scope the replacement to the full stack, then separate the cost fairly between the units it serves.
Freeze-thaw cycling and soot buildup are the usual cause. The damper mechanism loses its free movement over years of hard winters and a closed flue full of creosote. A seized damper on a shared stack can cause draft reversal or carbon monoxide spillover into another apartment, so we treat it as a safety item, not a nuisance.
You don’t, and that’s exactly why we test all of them. We run a camera and smoke test on every flue in the stack and compare the results before diagnosing anything. The answer often surprises the caller: the visible issue may sit on a neighbor’s bay while the real crack is behind your own cap seam.
Only after an inspection confirms the chimney chase is properly sealed and structurally sound. On many converted lofts the cover hides rusted base plates and separated seams that are already letting water in, which accelerates mortar-joint decay. We inspect first, then recommend. Call (855) 301-8570 for a free estimate. We answer 24/7.
Yes, when it’s the right fit and properly sealed at the crown seam. Bushwick’s pigeon and squirrel nesting runs spring through fall, and a cracked seam on an 1880s-1920s clay-tile liner is the entry point. We check the seam and the mortar bed before confirming the cap will actually do its job.
Service Areas Near Bushwick
We provide Gelco chimney cleaning across Bushwick and the surrounding neighborhoods. Nearby areas we serve include Williamsburg, Bedford-Stuyvesant, Clinton Hill, Prospect Heights and Fort Greene, plus Williamsburg along the waterfront. If you’re not sure whether your address falls inside our coverage, call and we’ll confirm.
Book Your Gelco Service in Bushwick Today
If your Gelco cap, damper or cover needs a look, call (855) 301-8570 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. We’ll inspect the whole stack, show you what we find, and give you a written estimate before any work is booked. No pressure, and no upselling.
Written by the team at Chimney Sweep Williamsburg.