Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
DuraFlex Chimney Cleaning in Crown Heights, NY
We provide independent DuraFlex service across Crown Heights, and the one thing that makes our DuraFlex work here different is what we find above the roofline: shared party-wall stacks with original clay tiles, often uncapped, on rowhouses built between 1900 and 1935. That combination of aging tile and shared venting is where DuraFlex liners do the most good and where they fail most quietly. Chimney Sweep Williamsburg is an independent DuraFlex service provider, not manufacturer-affiliated or authorized. We install, repair and service DuraFlex liners with quality parts that fit them. Call (855) 301-8570. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.

Why Crown Heights Residents Choose Us for DuraFlex Service
We know this product line from the inside. Our technicians have up to 12 years of experience, and the DuraFlex work we do in Crown Heights is the kind that rewards familiarity: fitting a flexible stainless liner into a flue that was cut for coal and never expected to handle a gas boiler’s moisture. We know the clearances each liner type needs, where bottom supports and top clamps tend to loosen on old brick, and how to read a spalling crown before it pulls a joint apart.
Because we’re not tied to any manufacturer, we can recommend DuraFlex when it’s the right call and tell you honestly when another approach makes more sense. That independence matters on a block of shared stacks, where the answer for one unit isn’t always the answer for the neighbor.
Scheduling is straightforward: you call, we book a visit, and the written estimate sets the price before any work starts. Nothing is recommended without camera evidence you can see for yourself.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Common DuraFlex Chimney Cleaning Problems We Solve in Crown Heights
- Degraded insulation wrap on DuraFlex Pro liners. A missing cap lets nor’easter rain and snowmelt run straight down the flue, and that moisture breaks down the insulation wrap over time. In Crown Heights’s freeze-thaw winters, an under-protected liner takes the damage fast. New cap, new wrap, and the liner is back to doing its job.
- Undersized DuraFlex SW liners in original clay tiles. A single-wall liner dropped into a cracked tile without a full-length cleanout traps creosote and soot at every offset. We clean the full run and refit the liner so nothing has a shelf to collect on.
- Loosened bottom supports and top clamps on DuraFlex RL kits. The soft clay brick around many Crown Heights crowns spalls and shifts, and when it does the liner moves with it. A joint that separates is a venting problem, not a cosmetic one. We reset the support and address the brick that’s failing.
- Rusted dampers and corroded tee caps. These go unnoticed in shared party-wall flues until a failed connection starts venting flue gas the wrong way. On a stack serving two units, that’s how carbon monoxide reaches a neighbor.
- Kinked or under-insulated runs from old installations. When a liner has been forced through an offset it wasn’t sized for, cleaning won’t fix it. We document what we see with photos and explain when a partial repair is enough and when the full run has to come out.
DuraFlex Service in Crown Heights: What Local Conditions Mean for Your Equipment
Here’s the Crown Heights fact that shapes almost every DuraFlex job we quote: the shared party-wall stacks on these rowhouses often vent multiple units through one chimney. That changes what a small defect means. A cracked flue tile or a separated DuraFlex liner joint doesn’t just affect the apartment it sits behind. It can send carbon monoxide into a neighbor’s unit through the shared stack. So on these blocks, relining and sealing is a block-safety matter, not a single-home upgrade.
Layer the housing on top of that. Three- and four-story brick rowhouses and brownstones, many built between 1900 and 1935, with interior stacks tucked behind plaster walls. Access is slow and careful work. The original clay tiles are often cracked or spalling, and many now vent gas boilers instead of coal. Humid summers and freeze-thaw winters work on the soft clay and mortar crowns the whole time, and uncapped flues let snowmelt rust dampers and crack tiles further. A DuraFlex liner installed correctly handles all of it. One installed without a cap and a full cleanout just hides the problem until the next freeze.
DuraFlex Models & Products We Service in Crown Heights
We work with the DuraFlex liner types that come up most in Crown Heights rowhouses and brownstones. Single-wall flexible liner for interior brick flues serving gas boilers. Double-wall insulated liner where clearance to combustibles is tight in a shared party-wall stack. Relining kits with tee and cap for offset flues. Rigid liner sections for straight runs above the roofline on the taller buildings.
For parts, we use DuraFlex OEM liner components, clamps and caps where they’re available. We go to quality aftermarket stainless fittings only when the OEM part is discontinued or a custom offset requires fabrication. Those are the two honest options, and we’ll tell you which one your chimney needs. Nothing gets recommended without camera evidence you can see and a written estimate that sets the price.
See the difference
Before
After
Before
After
Before
AfterDuraFlex Service Pricing in Crown Heights
Pricing here is set per job by the written estimate, because these chimneys vary so much. A three-story brownstone with an offset flue behind plaster and a party-wall stack is a different job from a straight run on a shorter rowhouse, and a quote over the phone would be a guess. The free estimate covers the Level 2 inspection, camera work and photos, so you can see exactly what we see before you decide.

What moves the price: whether the liner just needs a new cap and a cleaning or a failed section removed, whether the tile behind it is sound enough to support a repair, and how much plaster access the stack requires. If work can safely wait, we’ll say so. Call (855) 301-8570 for an exact quote. Estimates are free.
Serving Crown Heights, NY – Our Local Coverage Area
We serve Crown Heights and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – DuraFlex Chimney Cleaning in Crown Heights
Because a stuck damper and a persistent smell usually trace back to moisture and an uncapped flue, not the liner itself. Rain and snowmelt run down an open chimney, rust the damper and soak the liner, and the smell hangs around long after. The fix starts with a Level 2 inspection to see whether the insulation wrap has degraded and whether the tee cap is corroded. Call (855) 301-8570 for an exact quote. Estimates are free.
Yes, and it’s one of the more common jobs on Crown Heights blocks, but it requires careful clearance work because a double-wall insulated liner is often the right choice where the stack is shared. Each flue has to be sized and supported independently, and the top cap has to close the stack properly so no unit vents into another. We bring camera evidence and photos so both sides can see what’s happening inside the shared stack.
A cleaning is enough when the liner is sound and the problem is soot and creosote. Relining is the answer when the liner is kinked, under-insulated, or the clay tile around it is spalling and can no longer support it. You can’t tell from the firebox, which is why we scope the full run and show you the footage. We repair the existing liner when a single joint or cap has failed, and replace the full run only when it’s genuinely compromised.
Yes, and it matters more than most people expect. A gas boiler sends moisture up the flue, and without a cap, rain and snowmelt add to it. That’s what degrades DuraFlex Pro insulation wrap and rusts dampers. On a shared stack, an open flue also gives flue gas a path toward a neighboring unit. A cap is a small job with a large effect.
It stops the freeze-thaw cycle from eating the soft clay brick and mortar crown around your chimney, which is what loosens top clamps and pulls liner joints apart. Waterproofing the masonry keeps the structure sound so the liner stays where it belongs. Call (855) 301-8570 for an exact quote. Estimates are free.
Service Areas Near Crown Heights
We work on DuraFlex systems in Crown Heights and the blocks around it, including Williamsburg, Bedford-Stuyvesant, Clinton Hill, Prospect Heights and Fort Greene. If you’re nearby and not sure whether you’re in range, call and we’ll tell you straight. We also serve East Flatbush and Williamsburg.
Book Your DuraFlex Service in Crown Heights Today
If your Crown Heights chimney has an uncapped flue, a sticking damper or a liner you’ve never had looked at, book the free estimate. We’ll scope the full run, show you the photos and tell you what can wait. Call (855) 301-8570. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Williamsburg.