Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Trusted Chimney Cap & Crown for Williamsburg Homeowners
A missing or cracked chimney cap is the open door that lets Brooklyn rain, squirrels, and nesting birds straight into your flue. What most homeowners don’t realize is that the crown underneath it, the concrete slab sealing the top of the chimney, is usually failing at the same time. Water gets in, freezes, and the damage moves down the stack before anyone notices.
That’s the part we fix. Our technicians have up to 12 years of experience reading chimney tops and telling you what’s actually failing versus what can wait. We work with professional-grade materials from DuraFlex, Gelco, and Olympia Chimney, so the cap and crown we install are built for New York weather, not hardware-store shortcuts. We serve Williamsburg and the surrounding neighborhoods with fast dispatch from 7am to 7pm, Sunday through Friday, and we can often assess a chimney the same day you call. Reach us at (855) 301-8570.
What Our Chimney Cap & Crown Service Includes
A chimney is a system. The cap and crown are the top of that system, and when either one fails, everything below it pays the price. Here’s what each part of the job involves.
Cap Installation
A chimney cap is the mesh-and-metal cover that sits on top of the flue, keeping rain, debris, and animals out while letting smoke escape. You need one installed if your flue is currently open to the sky, which is common on older Williamsburg rowhouses where the original cap rusted away or was never fitted. We measure the flue opening, match the cap to the flue type, and secure it so wind and snow load don’t shift it. Every cap we install comes from a professional-grade line like Olympia Chimney or Gelco, not a universal fit that rattles in a storm.

Cap Replacement
Caps don’t last forever. Rusted mesh, a bent frame, or a cap that’s pulled loose from its mounting is a signal to replace rather than patch. You need a replacement when the mesh is torn (animals get in), when the cap sits crooked, or when rust has eaten through the seams. We remove the old cap, inspect the flue top while it’s exposed, and install a new one sized correctly for your chimney. If the crown beneath it is also failing, we’ll tell you, because replacing a cap over a cracked crown just traps water underneath.

Crown Repair
The crown is the sloped concrete or masonry surface at the very top of the chimney that sheds water away from the flue. A cracked or crumbling crown lets water soak into the masonry, and in a freezing climate that water expands and splits the brick from the inside. You need crown repair when you see cracks wider than a hairline, chunks missing from the edge, or efflorescence (white staining) on the chimney’s exterior. We rebuild the crown with a proper slope and overhang so water runs off the way it should.

Crown Coating
Crown coating is a flexible, waterproof sealant applied over a crown that’s still structurally sound but showing early wear. It’s the right call when the crown has surface cracks or minor pitting but no structural failure yet, and it’s a way to extend the life of a crown that’s otherwise doing its job. We clean and prep the surface, then apply a coating that moves with the crown as it expands and contracts through freeze-thaw cycles. We only recommend coating when the crown can support it; a crown that’s already crumbling needs repair first.
Multi-Flue Cap
A multi-flue cap covers two or more flues under a single housing, common on chimneys that serve a furnace and a fireplace or on larger Williamsburg homes with multiple flue openings. You need one when separate caps are getting crowded, when animals have found a gap between flues, or when you want a cleaner, more weather-tight top. We build these to fit the exact footprint of your chimney, with proper ventilation for each flue so draft isn’t restricted. Custom fabrication from Copperfield or Famco stock lets us match the shape and finish to your home.
Custom Cap
Some chimneys don’t fit a stock cap. Oversized flues, unusual masonry shapes, historic rowhouse profiles, or a chimney with an offset crown all call for a custom build. We measure on site, fabricate to spec, and install a cap that fits the chimney the way it was meant to, not the closest thing off a shelf. A custom cap from DuraFlex or a comparable professional line is the right answer when a stock unit would leave gaps, sit unevenly, or look out of place on the house.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Brands We Service for Chimney Cap & Crown
We install and service caps and crowns built from the materials certified chimney engineers actually specify. DuraFlex gives us a flexible, stainless system for relining and cap work where the flue isn’t perfectly straight, and it wears well in the freeze-thaw cycling that hits Brooklyn roofs every winter. HeatShield ceramic resurfacing is the answer when the flue itself has deteriorated under a failing crown, and we know where that ceramic application holds and where it won’t. Gelco and Olympia Chimney supply the cap housings and covers we use most often for stock and semi-custom jobs.
The point of naming these brands is simple: we know where each product wears out, what to look for when a cap is failing, and how to install it so it lasts. When a cap on your Williamsburg chimney was put up by someone else years ago, we can still tell you what it is and whether it’s worth keeping. Whether you have Olympia Chimney, Gelco, or any other make on your roof, we can help.
Signs You Need Chimney Cap & Crown Right Now
- Water stains or rust streaks inside the firebox. Dark streaks down the firebox walls or rust on the damper mean water is getting past the cap or crown. Left alone, that moisture rots the damper and eats into the masonry from the inside, which is far more expensive than a cap replacement.
- Animals or nesting material in the flue. Birds, squirrels, and raccoons treat an open flue as a ready-made den. If you hear scratching, smell something animal in the fireplace, or see nesting debris when you open the damper, you need a cap installed before the next visitor settles in.
- A cracked, crumbling, or missing crown. Hairline cracks are normal wear; wide cracks, chunks breaking off, or a crown that’s pulling away from the flue are not. That’s the point where water starts moving into the chimney’s structure and the repair gets bigger every freeze.
- Visible rust or a bent cap from the ground. If you can see rust-through or a crooked cap with binoculars from the yard, it’s already failing. A cap that’s lost its mesh no longer blocks debris or animals, which defeats its purpose.
- Smoke backing into the room or a weak draft. A cap that’s too small, partially blocked, or rusted shut restricts the flue and pushes smoke back into the house. Draft problems are worth checking at the top of the chimney before assuming the firebox is the culprit.
Our Chimney Cap & Crown Process – Step by Step
- 1
Book the visit and confirm the scope. We start with a call to understand what you’re seeing, then book a time that works. We answer 24/7, and we dispatch Sunday through Friday, 7am to 7pm. If it’s something we can assess the same day, we’ll tell you.
- 2
Inspect the whole chimney top, not just the cap. On site, we check the cap, the flue opening, the crown, the flashing, and the masonry at the top of the stack. A cap doesn’t fail in isolation, and we want to find the actual cause before recommending anything.
- 3
Show you what we find and explain the options. We walk you through what’s worn, what’s failing, and what can wait. Nothing gets recommended without you seeing the evidence, whether that’s a photo or a look at the chimney top with us.
- 4
Provide a written estimate with materials named. The estimate covers labor, materials, and disposal, and it names the brand and product we plan to install. You get the flat price before any work starts, and that’s what the job costs.
- 5
Install, clean up, and confirm. We install the cap or rebuild the crown, clear the work area, and make sure the flue is drafting the way it should. If the job called for a repair we didn’t quote, we’ll flag it before we leave, not after.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Cap & Crown Cost in Williamsburg?
Most chimney cap and crown work in Williamsburg is a modest job that prevents an expensive one. A typical single-flue cap installation runs roughly $275 to $650, depending on the flue size and whether the cap is stock or built to fit. A basic crown repair, resealing the top and patching cracks, runs about $300 to $800. A full crown rebuild on a larger chimney or one with significant deterioration runs roughly $700 to $1,800. Multi-flue and fully custom caps sit at the higher end of those ranges because they’re measured, fabricated, and fitted to the chimney rather than dropped on.
A few things affect where your job lands. The height and pitch of the roof matters when it comes to safe access and setup. The size and number of flues drives the material cost. And the condition of the crown decides whether you’re installing a cap over sound concrete or repairing the surface first. If you’re getting quotes, ask what happens if the crown turns out to be worse than it looked: the honest answer is that it gets quoted before work starts, not billed as a surprise. We look at the whole top of the chimney and tell you what can wait, so you’re not paying for a rebuild you don’t need yet. The written estimate sets the final price. Call (855) 301-8570 for an exact quote; estimates are free.
Chimney Cap & Crown Near Williamsburg – Our Service Area
We serve Williamsburg and the neighborhoods around it, including Bedford-Stuyvesant, Clinton Hill, Fort Greene, Bushwick, Prospect Heights, and Crown Heights. If you’re just across the bridge in Park Slope, Brooklyn Heights, or Flatbush, we’re in reach too. Our technicians move through these neighborhoods with fast dispatch from 7am to 7pm, Sunday through Friday, and most roofs can be assessed within a day or two of booking. If you’re further out, call and we’ll confirm coverage before we book. You can also read more about our broader chimney sweep service and our chimney cap & crown work in neighboring Bedford-Stuyvesant.
Serving Williamsburg, NY – Our Local Coverage Area
We serve Williamsburg and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Chimney Cap & Crown in Williamsburg
A chimney cap is the metal-and-mesh cover that sits on top of the flue and keeps rain, debris, and animals out while letting smoke escape. The crown is the sloped concrete or masonry surface at the very top of the chimney that sheds water away from the flue. They work as a pair: the cap protects the flue opening, and the crown protects the masonry around it. When one fails, the other usually follows, which is why we look at both together.
Most single-flue cap installations take about an hour once we’re on the roof. Crown repair, resealing, and coating usually take a few hours depending on how much surface needs prep. A full crown rebuild or a custom multi-flue cap can take most of a day because they involve fabrication and curing. We’ll give you a realistic time on the estimate, so you can plan around it.
Estimates vary with the roof, the flue count, and the condition of the crown, and the written estimate is what sets the final price. A single-flue cap usually lands in the high hundreds, while a full crown rebuild sits above that. You’re paying for the material, the access work, and the labor to do it right the first time. Call (855) 301-8570 for an exact quote; estimates are free.
Yes. We install and service Olympia Chimney, Gelco, DuraFlex, and HeatShield systems, along with caps and liners from comparable professional lines. We know where each of these products tends to wear, from rust-through on the mesh to crown separation at the mounting. Whether your roof has one of these or a cap from another maker, we can assess it and match a replacement to what’s already there. Call (855) 301-8570 and we’ll book a look.
We answer 24/7, and we offer fast dispatch from 7am to 7pm, Sunday through Friday, so same-day assessments are often possible when you call early. The installation itself depends on materials on hand, so we may book a follow-up visit to complete a custom build. A call outside dispatch hours is booked into the next opening. Call (855) 301-8570 to check availability for your address.
Yes, and the details depend on the product line and the scope of the job, so we’ll spell it out on your written estimate before any work starts. Material warranties come from the manufacturer, and our workmanship is covered under terms we’ll put in writing. If something fails early, call us and we’ll look at it. Call (855) 301-8570 to ask what applies to your specific installation.
Clear access to the chimney from inside the house, and make sure the roof is reachable from the ground without obstruction, is all you need to do. If you know the last time the chimney was swept, tell us; a sweep may be worth scheduling alongside the cap work so the flue is clean when the new cap goes on. Secure pets and keep kids clear of the work area. Call (855) 301-8570 with any access questions before we arrive.
Schedule Your Chimney Cap & Crown Service in Williamsburg Today
A failing cap or crown is one of the cheaper chimney problems to fix and one of the more expensive to ignore. We’ll look at the whole top of your chimney, tell you what’s actually failing, and quote the work before anything starts. Call (855) 301-8570 for a free, no-obligation estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. You can also learn more about our chimney cap & crown work in Clinton Hill and our full chimney cap & crown services for Williamsburg homeowners.
Written by the team at Chimney Sweep Williamsburg.