Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
HeatShield Chimney Cleaning in Flatbush, NY
We provide independent HeatShield service across Flatbush, relining the flues that serve gas boilers and water heaters in the neighborhood’s coal-era rowhouses. What sets our HeatShield work here apart is the flue itself: most Flatbush chimneys were built for coal, then converted to gas appliances, so sizing, spillage testing and carbon monoxide safety matter more than a routine creosote sweep ever will. Whether your building is off Flatbush Avenue or Church Avenue, we start with a Level 2 inspection and work from camera evidence. Call (855) 301-8570 for a free estimate. We answer 24/7.

Why Flatbush Residents Choose Us for HeatShield Service
HeatShield is a cast-in-place flue resurfacing system, and the way it performs depends almost entirely on how well it’s specified for the appliance actually venting the flue. That’s where our approach earns its keep. We’re an independent HeatShield service provider, not affiliated with, authorized by or endorsed by the manufacturer, so our recommendations rest on the flue in front of us rather than a brand script. Our technicians have up to 12 years of experience reading coal-era chimney interiors and matching liner type, ovalization and insulation to the boiler or water heater tied into it.
Flatbush rowhouse owners and landlords get a written scope before anything is booked, and the flat price for the sweep or lining job is agreed in advance. Nothing gets recommended without camera footage and a photo report you can review yourself. Scheduling works around occupied buildings and tenants, and we’ll tell you plainly when a liner can safely wait a season. You can read more about how we serve Flatbush and its building stock.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Common HeatShield Chimney Cleaning Problems We Solve in Flatbush
The failures we find in Flatbush tend to come from the flue’s history rather than the product itself. These are the patterns we diagnose most often.
- Delaminated parge coat under a cast liner. Many coal-era flues in Flatbush were finished with a mortar parge that has since crumbled. If prep and adhesion aren’t right, a new poured HeatShield liner can debond or crack, so we strip and stabilize the interior before any refractory cement goes in.
- Liner oversized for the gas appliance. A flue sized for a coal fire is usually far too large for a modern gas boiler’s Btu input. The result is weak draft, condensation and spillage, which we correct by right-sizing the HeatShield liner to the appliance actually connected.
- Spalling brick on exposed stacks. Humid Flatbush summers work moisture into exposed brick chimney stacks, and that spalling can undermine the flue the HeatShield liner sits inside. Repointing and waterproofing usually come before relining, not after.
- Shared party-wall chases. On the rowhouse blocks off Flatbush Avenue, a neighbor’s appliance often ties into the same chase as yours. Lining one flue without verifying the other leaves a CO pathway open, so we camera both.
- Disconnected flues behind finished walls. In owner-managed buildings with deferred maintenance, we routinely find unlined or disconnected flues boxed in behind walls. A Level 2 inspection with camera is the only reliable way to catch it.
HeatShield Service in Flatbush: What Local Conditions Mean for Your Equipment
Here’s the local condition that shapes every HeatShield job we take on in Flatbush: the boiler flues in these Victorian and pre-war rowhouses were built for coal and frequently share a single party-wall stack across neighboring buildings. What a homeowner expects to be a routine sweep often turns into a shared-flue and CO-spillage investigation, a situation far less common in neighborhoods built for gas from the start. The cold, damp Northeast winter makes it worse. Heating appliances run hard from November through March, and flue draft, condensation and spillage risks peak exactly when boilers cycle constantly. A typical Flatbush job starts with a Level 2 inspection and camera, tests spillage under real boiler cycling, then recommends right-sizing the vent with a HeatShield cast-in-place liner or stainless reline, plus repointing where summer spalling has opened the brick. It closes with CO verification once the new liner is cured. That sequence is the whole job, and skipping any step is how trouble gets missed.
HeatShield Models & Products We Service in Flatbush
We work with the three main forms HeatShield takes: the cast-in-place refractory cement liner, poured and custom-formed to the existing flue; TherMix insulating cement, which wraps that cast liner so it performs as a rated system; and HeatShield stainless steel liner systems with their associated components. We specify genuine HeatShield liner parts and insulating mixes for the cast-in-place work so the finished liner is rated as a system rather than a patch job. Where a cap, damper or flashing needs replacing, we use quality aftermarket parts that meet the same listing. Everything we fit is chosen for the flue and appliance in front of us, then verified with spillage and CO testing. Our full HeatShield capability is here if you want the detail.
See the difference
Before
After
Before
After
Before
AfterHeatShield Service Pricing in Flatbush
A HeatShield relining job in Flatbush is priced per job from a written estimate, because liner type, ovalization, insulation and stack condition all change the scope. Typical ranges for the work we do:
| Service | Typical estimated range |
|---|---|
| Level 2 inspection with camera and photo report | $250 – $450 |
| HeatShield cast-in-place liner (single flue) | $1,800 – $3,600 |
| Stainless reline for a gas boiler flue | $1,600 – $3,200 |
| Mortar repointing on an exposed stack | $400 – $1,200 |
| CO and spillage verification after relining | included with the lining job |
These are estimates, and the written quote sets the final price. The free estimate includes the camera inspection and a photo report you keep. Call (855) 301-8570 for an exact quote.
Serving Flatbush, NY – Our Local Coverage Area
We serve Flatbush and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – HeatShield Chimney Cleaning in Flatbush
My Flatbush basement boiler vents into an old coal flue – can HeatShield reline it, and do I need a Level 2 first? Yes, a coal-era flue can be relined with HeatShield, and yes, a Level 2 inspection with camera comes first. The inspection tells us whether the original parge is sound enough to receive a cast liner or whether it needs stripping and stabilizing first. Without that, a poured liner can fail. Call (855) 301-8570 to book the inspection and get a quote.
A neighbor’s flue seems to run through the same stack as mine in our Flatbush rowhouse. Why does that matter for lining? It matters because a shared party-wall chase means two appliances vent into one stack, and lining your flue without checking your neighbor’s leaves a CO pathway open. We camera both sides before recommending a liner. If the chase is shared, that changes the scope, and we’ll say so on the estimate.
Will a HeatShield cast-in-place liner survive the humid Flatbush summers and spalling on my exposed chimney stack? It will, provided the brick around it is sound. Humid summers accelerate spalling on exposed stacks, and spalling brick can crack the poured refractory sitting inside it. That’s why repointing and waterproofing usually come before or alongside a reline. We inspect the stack exterior as part of the same visit.
Is HeatShield the right call for a gas boiler flue, or should I just use a stainless liner? Either can work, and the choice comes down to flue condition and shape. HeatShield suits coal-era flues that are sound but oversized or irregular, because a cast liner forms to the existing cross-section. Stainless is often the better call for a badly spalled or disconnected flue. We’ll tell you which fits your Flatbush building and why. Call (855) 301-8570 to talk it through.
What does a HeatShield lining job typically involve from inspection to final CO test in a Flatbush rowhouse? It runs in a set order: Level 2 inspection and camera, spillage testing under real boiler cycling, right-sizing the vent, installing the cast-in-place HeatShield liner or stainless reline, repointing or waterproofing where spalling has opened the brick, then CO verification once the new liner is cured. Most jobs fit within a few working days depending on cure time. Call (855) 301-8570 for an exact quote.
Service Areas Near Flatbush
We also serve homeowners and landlords in Williamsburg, Bedford-Stuyvesant, Clinton Hill, Prospect Heights and Fort Greene. If you’re over in East Flatbush or Crown Heights, we cover those blocks too, with the same inspection-first approach. Reach out and we’ll confirm your building’s flue type before booking.
Book Your HeatShield Service in Flatbush Today
Whether it’s a Level 2 inspection, a HeatShield reline, or repointing on an exposed stack, we’ll give you a free estimate and a written scope before anything is booked. Call (855) 301-8570. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. Every job closes with a CO verification.
Written by the team at Chimney Sweep Williamsburg.